Windows 95

              The Minolta WinLaser 400 will not be properly installed
            with Windows 95 CD-ROM.  The Plug-n-Play setup does not
            handle the WinLaser 400 correctly.  The WINLASER.EXE program
            on diskette 1 updates Plug-n-Play so that it will correctly
            install the Minolta WinLaser 400.  The README.W95 file, also
            on diskette 1, contains information pertaining to the
            WinLaser 400 and Windows 95.

            The following procedure should be followed when connecting a
            Minolta WinLaser 400 to a computer running Windows 95:

            1.   Do not start Windows 95 if the Minolta WinLaser 400 is
                 powered on and connected to the computer.
            2.   Turn off the WinLaser 400.
            3.   Start Windows 95.
            4.   Execute WINLASER.EXE from diskette 1.
                 a)   Insert diskette 1 into drive A:
                 b)   Select START or press CTRL-ESC.
                 c)   Select RUN
                 d)   Type A:WINLASER
                 e)   Press ENTER
            5.   Follow the instructions on the screen.
            6.   The system will automatically RESTART WINDOWS when it
                 is complete.
            7.   The normal Plug-n-Play process will now install the
                 WinLaser 400 correctly.

            If you have already attempted to install the Minolta
            WinLaser 400, the WINLASER.EXE program attempts to return
            Windows 95 to the correct state to properly install the
            printer.